Pro Ceramic LLC
NAUTIK Nano-Epoxy Marine Ceramic Coating 100ml
NAUTIK Nano-Epoxy Marine Ceramic Coating 100ml
Couldn't load pickup availability
THE revolution in watercraft protection has arrived. From the creators of CQUARTZ comes this incredible new method of protection for all marine vessels. NAUTIK was specifically formulated to resist the harsh conditions of saltwater, whilst offering resistance to sun damage, algae, barnacles, fading, and more. In freshwater rivers and lakes, NOTHING resists algae and scumminess better than NAUTIK. In testing we found scum lines and algae to wipe off with ZERO resistance.
NAUTIK was designed to bond directly with gel-coat and fiberglass surfaces where it becomes a solid barrier between the surface and its environment. Once installed, your watercraft becomes far easier to clean. No longer will you constantly have to abrade or polish the surface just to get it clean. In real world tests, algae, scum lines, and other normally tough dirt, were easily removed with a simple wipe of a microfiber towel.
Not only does NAUTIK’s unique VOC-free formula protect the surface and makes it far easier to clean but it also enhances and protects the gloss of the finish for years to come!
CARPRO Nautik 100ml Kit - Professional Marine Coating
Contents:
- (1) 100ml bottle Nautik Marine Coating.
- (5) Suede MF 6” x 6”.
- (1) Large foam applicator block.
- (1) Owners manual.
Preparation:
- Wash vehicle.
- Decontaminate with Iron X and Polyshave Decon Pads, Blocks, Towels, or Clay.
- Polish all painted surfaces to the highest standard.
- Do NOT use un-authorized polishes with durable fillers or protection in them.
- Thoroughly wipe down surface with Eraser. Or when needed a painters prep solvent to remove all polishing oils. Flip, switch towels often.
- There shall be no contaminants, wax, sealant, polishing oils, or oil of any kind on the paint before application.
Application Instructions:
- Shake bottle for a moment.
- Add 2 lines of product to applicator and apply to area, spreading evenly across the surface. Add more product as needed.
- Allow to flash for 1 ~ 5 minutes in moderate temperature or until product separates slightly.
- Wipe off with CARPRO 2 Face “no lint” towel in overlapping wipes and ensure all residue is removed.
- Move to next area and repeat steps 2 - 4 until entire vehicle is coated. NOTE: Replace suede applicators as needed throughout process.
- Layering after 35 minutes - Begin at same location you started on with the first coat and repeat process with the second coat.
- Caution: Waiting very long to wipe off could become very hard, (if not impossible) to wipe off residue.
- Cure Time: Touch dry after 1 Hour / Full dry time: 48 Hours / Do not wash for 5 days unless contaminated with bird droppings or similar contaminants.
- Reload may be applied anytime after 1 hour.
Precautions:
- Do not re-use the towels or applicators on paint.
- Wear nitrile gloves.
- Use painters mask with all nano coatings.
Share
